Farmhouse Bathroom Backsplash Ideas

Farmhouse Bathroom Backsplash Ideas – I will put a part of my mind in the bathroom of the hall of my dearest dreams! haha! I love, love how our DIY tile turned out, but tile is not for the faint of heart. No – scratch. Dark Groutis is not for the faint of heart. Black grout looks amazing if it’s done right, and boy, when you’re done, do you have to work quickly and efficiently to get it perfect. This was our second tile project, so we were brave enough to go black. As painful as it is to work with, I’m very happy with how it looks in space.

In this post, I’ll share some of my tiling tips, the products and tools we use, and of course, the amazing bathroom before and after. All products and tools are linked at the bottom of the post!

Farmhouse Bathroom Backsplash Ideas

Farmhouse Bathroom Backsplash Ideas

Every time I look at our previous photos, I can’t believe we liked it so much. haha! The before picture of the sink wall below is before we painted, and then the next picture in front of the shower wall is back from when we painted the bathroom a year ago. We thought the color made such a big difference, well it did, but the tile really took our hall bathroom to the next level.

Small Bathroom Backsplash Ideas And Inspiration

I would like to show a better picture of the bathroom from when I first moved in. It had all silver fixtures, bad design light fixtures, silver handles and silver shower fixtures – we changed it to black as possible.haha! You can see the silver faucet before we cut it off…hate it. First of all, the only reason we had silver in the house was because it was included in the purchase price and we knew we could replace it all later for less than a builder update — plus, that’s exactly what we got. We wanted. We have easily saved thousands of dollars by doing simple things.

My biggest tip is to get it. If you try to rush something, you will make a mistake and the tile is not forgiving at all. Start by preparing the walls. I cannot stress this enough. Prepare the walls by filling each hole with caulk, then take 100-grit sandpaper over the entire surface of the wall you’re going to tile. This will help roughen the wall and make the tile adhesive stick a little better – especially if you’ve recently painted the walls.

We’ve heard mixed reviews about this move, but honestly, it’s worth doing. It all took about five minutes, and even though it was an extra step, it gave me some peace of mind knowing that it could help make our tile project that much more successful.

After sanding the entire wall, you’ll have a bit of a mess, so grab some old towels or paper towels and wipe down the wall and your space. After that, you can stick an adhesive tape on the ceiling or wrap an old towel over it. In our kitchen, we would open garbage bags and tape them to the counter, but in the bathroom, I would use an old towel wrapped around the sink. This protects your production from sand for easy cleaning. The tile is sticky and the grout is very messy. Don’t skip this step. I also recommend covering your shower/tub. I wanted to – but I didn’t think about it until it was too late.

Kitchen Backsplash Ideas For Every Kind Of Aesthetic

Turn off the switch to all outlets in the room where you will install the tiles. You work with water and you don’t want to get electrocuted. With the breaker off, you can remove the screws from the socket and slide the sockets out of the box about an inch to install the plate. Note: You will need longer screws when screwing the pan into place because the metal part sits on top of the plate, not flush with the wall.

Once everything is installed, you’re ready to go! I will show you the process of tiling the wall and then how I tiled the tub and shower. I actually had a lot of success with the tile wall. There was a small splash on the inside of the table and it was perfectly level!! I’m so happy because I expected it to be rough because of the new construction we’re starting, especially on our third floor.

Sometimes you have to start a row above the first level to make sure your tiles are straight, but since the ceiling is level, I was able to start and finish there. I installed my tiles along the arch that was installed as the first row, then down the wall behind the toilet. For the first row of tiles, I applied the tile adhesive directly to the tiles, but when I moved up the wall, I was able to apply the tile adhesive directly to the wall until I got to the bottom. It made installing tiles a breeze!

Farmhouse Bathroom Backsplash Ideas

When applying tile adhesive to a tile or wall, hold the edge of your trowel at a 90° angle to create ridges. This will help prevent overusing the adhesive and pinching the back of the tile as it sets.

The Perfect Tiles For Farmhouse Decor

I was able to use the tile ripper on most of this wall except where I got to the edge of the counter. It has a small lip and of course I wanted the tile to be perfect so I traced it out with a wet tile saw. When measuring where you will cut the tile, mark your tiles with a permanent marker if you are using a glazed tile! You can easily erase the permanent marker with your finger.

When I got to the bottom of the wall, I had to cut small pieces of tile about 1/4 inch wide. Fortunately, I was able to do this on a wet panel saw.

Pro tip: When cutting 1/4- to 1-inch pieces on a wet saw, use another board as a scrap board to help guide and push. You don’t want to get your fingers close to the blade.

Once you’ve finished installing the blinds, it’s time to go back to the top. For these lines, I glued the tile directly to the tile to minimize the mess. I wasn’t sure how many more tiles I was going to put up, so I didn’t want glue all over the wall.

Bathroom Backsplash Ideas You’ll Love

Before I installed the last row of tiles, it was time to install the black metal tile. They make real tile backsplashes, but I love the look of the white or black pieces we use in our custom home projects. Your last row of tiles will be glued to the wall.

Go slowly and use an extra hand to hold the cutout, or if you’re doing this project yourself, use painter’s tape to hold it to the wall. I used painter’s tape to hold each tile in place temporarily as I installed it, and then after the last tile was installed, I used painter’s tape to hold it in place until the glue set.

Use your level to make sure every other line is straight. The last thing you want is a wall with bent tiles.

Farmhouse Bathroom Backsplash Ideas

When tiling around our tub and shower, I wasn’t so happy that it was flat. In some places there was more than a 1/4 inch difference, which would have caused the slab to warp completely. I started laying the second row first to get the best alignment. You can use a laser level or use a level for each tile to make sure the line is always straight.

Farmhouse Bathroom Ideas On A Budget — Capturing Wonderland

I want to start with the very first row and fill the space at the bottom with a white hat, doing it a little differently. You’ll see when I’m done, I only had a 1/4-1/2 inch scrap for the top row and I hate to see the bottom of it and I could have had a little more clearance. There were small hidden tiles on the bottom row that were below or around because they were hidden by the shower curtain. Well, “the other house” as Chris and I always say.

As with any tiling project, take your time, oops! Measure twice, cut once, and try to keep your hands clean.

To surround the bathroom, we used white PVC tiles to ignore the edge of the tiles.

Bathroom backsplash ideas, farmhouse bathroom ideas, farmhouse bathroom rug ideas, farmhouse bathroom backsplash, diy bathroom backsplash ideas, farmhouse bathroom decor ideas, farmhouse master bathroom ideas, bathroom ideas modern farmhouse, farmhouse rustic bathroom ideas, cheap bathroom backsplash ideas, bathroom vanity backsplash ideas, farmhouse bathroom tile ideas

0 0 votes
Article Rating
Notify of
Inline Feedbacks
View all comments